DESCRIPTION
Endless webbing slings, are slings which are more versatile that exists in the market due to its adaptability to numerous applications.
With the proper handling of the endless sling ( turning its position to avoid the wearing out in the same place ), it stretches the useful life span of the sling.
They can be produced in fibers ( polyester, polypropylene, nylon ).
Depending on its use, they can be divided into reusable and non-reusable.
1.
Use is made easily and the sling may be attached on load tightly, which protects fine and colored surface of the load from damage;
2.
At high ratio of force to weight, the sling is of light weight and flexibility, and may be used without gloves or something else to protect;
3.
With high resistance to abrasion and low elongation, beneath 3% at WLL, and there is no jointing point inside the sling;
4.
With resistance to twisting or knotting;
5.
The soft eyes of the eye to eye webbing sling are reinforced to extend the life of use;
6.
In case of changing the bearing point on the endless webbing sling during its service, its using life will be extended;
7.
Surface of the sling may be treated with PU to enhance its resistance to abrasion if required;
8.
The sling made from material of polyester has immunity against most of mineral acids, but is damaged by alkalis easily;
9.
The sling made from material of nylon has immunity against alkalis, but is attacked by mineral acids easily;
10.
The sling made from polypropylene has immunity against both mineral acids and alkalis on the whole, it is suitable for usage under environment that resistance to chemicals but not including solvents is required. All the slings made from the three types of materials have immunity against water, oil and grease totally;
11.
The temperature scope to use and store the slings
For the sling from polyester: -40℃ through to 100℃ or -40℉ through to 212℉;
For the sling from nylon: -40℃ through to 100℃ or -40℉ through to 212℉;
For the sling from polypropylene: -40℃ through to 80℃ or -40℉ through to 176℉.
Material | 100% polyester, high tenacity multiple fiber filament |
Performed standard | AS1353.1-1997 |
Safety factor | 8:1 |
Length | 1 to 100M or as required |
Width | 30 to 450MM |
WLL | 1.00 to 24.00 Tonne |
Layer number | 1 to 2 layer |
Color | As international standard |
Type | Endless |
Copyright © 2019 Foshan Horngold Rigging Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist