One rear D ring anchorage and two webbing loops in front of chest. The harness has reevable buckles and oblong plastic covers, with which the adjustable shoulder belt ensures the chest belt placed over the area of chest sternum. It is adjustable well at chesh and thigh, which makes the wearer feel comfortable and secure; the bearing load 150KG; Made from 45MM width polyester webbing and steel fittings as EN361:2002. Each attached the label with serial number, four sizes of S,M,L,XL optional.
One rear D ring anchorage and two D rings in front of chest. The harness has reevable buckles and oblong plastic covers, with which the adjustable shoulder belt ensures the chest belt placed over the area of chest sternum. It is adjustable well at shoulders, chesh and thigh, which makes the wearer feel comfortable and secure; the bearing load 150KG; Made from 45MM width polyester webbing and steel fittings as EN361:2002. Each attached the label with serial number, four sizes of S,M,L,XL optional.
USAGE AND MAINTENANCE
When work is done at the place above 1.8M height, the full body safety harness shall be worn. For the operator off the ground, it is an ideal practice to wear the harness even if the relevant work does not require that it shall be worn;
Make it sure to wear the full body safety harness properly. There shall not be a slack at any position of the harness. And also, if it is too tight, restrictions to the space of movement will be imposed.
Prior to usage, the harness shall be inspected. In case of rupture, tear or abrasion on any component, it shall not be used any more;
The harness shall be inspected regularly by qualified person for being using if necessary. Check the sign for damage totally. Seek break, abrasion, cut on the fibers and relaxation on the stitching threads. Inspect the buckles to make sure of no bend or break. Ensure it that all rivets are secure and in the proper positions. Inspect abrasion, obstacle, weakening points and cut on the lanyard. The lanyard at any risk shall not be used;
Regularly replace the lanyard and ensure it not to get worn and embrittled. Shall keep the harness clean. In case that the harness gets dirty, it may lead to breakdown and cause accident;
The maximum arrest force that the operator in the harness is able to bear as fall happens is restricted at 60KG. To make sure it does not go beyond the force limit, the decelerator or the lanyard with shock absorber shall be considered to use so that the distance for free fall gets shortened as possible.
Clean the harness with dampened cloth or soft soap. Dry it entirely after cleaning. Do not place it in the direct sunlight, if not, it may cause the harness gets weakened and embrittled.
Copyright © 2019 Foshan Horngold Rigging Co., Ltd. | All Rights Reserved
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist